LG Gas Range Knob LED Patterns 1-6: Reading The Lights
LG gas ranges with a ring of LED segments around each burner knob (ON, DUAL and WARM) show six different light pictures. Reading them in the order the manual lists them, the first three point to…
- Code
- Gas range burner-knob LED patterns 1-6
- Appliance
- Range
- Brand
- LG
- Warranty
- 30-day workmanship
What Gas range burner-knob LED patterns 1-6 means
LG gas ranges with a ring of LED segments around each burner knob (ON, DUAL and WARM) show six different light pictures. Reading them in the order the manual lists them, the first three point to a thermistor error, the fourth to metal objects or water resting on the touch pads, the fifth to a display error, and the sixth to low supply voltage. This is our reading of that page order, so confirm which picture you see before acting.
Common causes of Gas range burner-knob LED patterns 1-6
- Thermistor circuit for the first three patterns
- Touch surface wet or covered by metal for the fourth pattern
- Display board for the fifth pattern
- Supply voltage at the range for the sixth pattern
1. Turn the knob off, then press the Power ON/OFF control. 2. If the lights return, switch the circuit breaker off for 30 seconds and back on. 3. For the fourth pattern, dry the surface and remove pans, utensils, or metal objects from the touch pads, then wipe clean. 4. For the sixth pattern, do not keep resetting; have a qualified electrician check the supply voltage. 5. If you smell gas, leave the house and call the gas utility from outside.
- The light pictures narrow the area, but the exact pattern and which burner it affects must be confirmed in person.
- We match what the knobs show to the range, test the circuit involved, and give a written price first.
- Voltage problems at the outlet may need an electrician before we can finish.
Other Range codes
How do I know which pattern I have?
Count the lit segments on the knob ring and note whether the ON, DUAL or WARM section is lit. Photograph it if you can; that helps us confirm which of the six meanings applies.
Can a wet cooktop cause a pattern?
Yes, the fourth pattern is tied to metal objects or water staying in contact with the touch pads. Dry the area, remove anything resting on it, and check whether the lights clear before calling.
Who fixes the low-voltage pattern?
Low supply voltage is outside the range itself, so a qualified electrician should check the circuit first. After that we can inspect the range, because a voltage problem can look similar to a control problem.
Still seeing Gas range burner-knob LED patterns 1-6?
A technician diagnoses it on site and gives you the price in writing before any work starts.