Error code · Styler

LG Styler Code CL: Control Lock or Touch Not Read

CL on an LG Styler steam closet, for example the S3WFBN, means the control lock is on or the touch panel is not recognizing your finger. The buttons respond to the static electricity of your hand,…

Low risk · DIY check OK

(713) 597-5662

Code: CL
Appliance: Styler
Brand: LG
Warranty: 30-day workmanship

What CL means

CL on an LG Styler steam closet, for example the S3WFBN, means the control lock is on or the touch panel is not recognizing your finger. The buttons respond to the static electricity of your hand, so a wet hand, a glove or grime on the panel can stop them from working. With Control Lock on, only the Power button works. It is a setting and a touch issue, not a failure of the closet.

Common causes of CL

Control Lock was switched on from the panel
A damp or gloved hand that the touch buttons cannot sense
Residue or moisture on the control panel surface
A panel that stays unresponsive after cleaning

✓ One safe check you can try

1. Dry your hands completely and remove any glove before touching the panel. 2. Wipe the panel with a clean, dry soft cloth. 3. Turn Control Lock off, then press the button you need. 4. If the buttons still do not respond, tell us what you tried.

! Why to stop there

If a dry hand and a clean panel still get no response, the touch sensing itself needs checking on site.
A panel that reacts only sometimes can point to moisture getting where it should not, and we look for that.
We give the price in writing before work, and our repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Styler codes

LELG Styler Code LE: Main Fan Restriction LE2LG Styler Code LE2: Compressor Restriction PSLG Styler Code PS: Supply Voltage tE1LG Styler Code tE1: Duct Out Thermistor tE2LG Styler Code tE2: Compressor Thermistor tE3LG Styler Code tE3: Duct In Thermistor tE4LG Styler Code tE4: Steam Thermistor tE5LG Styler Code tE5: Evaporator In Thermistor

CLCL questions

Is CL on a Styler an error?

No. CL means Control Lock is on or the touch was not recognized. Only the Power button works while Control Lock is active, so nothing is broken when you see it.

Why do the Styler buttons not respond to my touch?

The buttons read the static electricity of your hand. A wet hand, a glove or dirt on the panel can block that reading, so dry your hands and wipe the panel.

How do I turn Control Lock off?

Use the Control Lock setting on the panel to switch it off. If the panel does not accept any press after that, we can check the touch controls for you.

Book a visit

Still unsure about CL?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 597-5662