Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent LG specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 597-5662 Plan a Visit
Error code · Styler

LG Styler Code PS: Supply Voltage

PS on an LG Styler steam closet means the supply voltage is not correct. The closet reads the power coming into it, and PS shows when that is outside what it expects. You might see the…

High · stop use, call now
Plan a Visit(713) 597-5662
Code
PS
Appliance
Styler
Brand
LG
Warranty
30-day workmanship

What PS means

PS on an LG Styler steam closet means the supply voltage is not correct. The closet reads the power coming into it, and PS shows when that is outside what it expects. You might see the display flash PS, the cycle refuse to start, or the closet shut off partway. The S5WBC and other Styler models use the same message. Because it concerns incoming power, treat it with care.

Common causes of PS

  • The outlet and the power reaching the closet
  • The power cord and plug
  • A loose connection at the closet's power input
  • The control board that reads the incoming voltage
✓ One safe check you can try

1. Unplug the closet and look at the plug for any sign of heat or damage. 2. Plug it directly into a working wall outlet, not an extension cord or power strip. 3. Do not use the closet if the plug, cord or outlet looks damaged. 4. If PS returns, leave it unplugged and call us.

! Why to stop there
  • Whether the problem is the outlet, the cord or the board takes testing, and we do it with the closet's power in mind.
  • If the house supply is the issue, an electrician may need to look at the outlet, and we tell you so.
  • We quote in writing first, and the repair carries a 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Styler codes

LELG Styler Code LE: Main Fan Restriction LE2LG Styler Code LE2: Compressor Restriction tE1LG Styler Code tE1: Duct Out Thermistor tE2LG Styler Code tE2: Compressor Thermistor tE3LG Styler Code tE3: Duct In Thermistor tE4LG Styler Code tE4: Steam Thermistor tE5LG Styler Code tE5: Evaporator In Thermistor AELG Styler Code AE: Compressor Alignment
PSPS questions
Why does the Styler display PS?

PS means the supply voltage is not correct. The closet is reading incoming power outside the range it expects, so the cycle may refuse to start or shut off partway through.

Can I use an extension cord for the Styler?

Plug the closet straight into a wall outlet. An extension cord or power strip can add to voltage problems, so avoid them while PS is showing.

Is PS dangerous?

It can point to a power or wiring condition, so do not keep running the closet if the cord or outlet looks damaged. Call us and we can check the closet.

Book a visit

Still seeing PS?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 597-5662
☎ Call the desk ▤ Plan a Visit