LG Dishwasher Code LE: Cleaning Motor
LE on an LG dishwasher means the cleaning motor is not working normally. The cleaning motor is the pump that circulates wash water through the spray arms, so a problem there means the dishes do not…
- Code
- LE
- Appliance
- Dishwasher
- Brand
- LG
- Warranty
- 30-day workmanship
What LE means
LE on an LG dishwasher means the cleaning motor is not working normally. The cleaning motor is the pump that circulates wash water through the spray arms, so a problem there means the dishes do not get cleaned properly, and the control stops the cycle. Codes can differ by model. The motor sits inside the machine under the tub, which is why this needs a technician rather than a home adjustment. You may hear humming or no sound at all.
Common causes of LE
- Cleaning motor that is weak, stuck or open
- Motor wiring or connector
- Control output to the motor
1. Cancel the cycle and let the water drain. 2. Open the door and check that no dish or utensil sits low and blocks the spray arm. 3. Do not open panels or reach below the tub. 4. Wash dishes by hand until the repair. 5. Call us and mention the code LE.
- We check whether the motor gets power and turns, and whether it makes noise.
- A stuck motor and a failed control signal look the same from the panel, so we test both.
- We run a full wash and check for steady spray before we finish.
Other Dishwasher codes
Is the cleaning motor the same as the drain pump?
No. The drain pump removes water. The cleaning motor circulates wash water through the spray arms. LE refers to the cleaning motor. The two are separate parts, so a draining dishwasher can still show LE when the wash motor is the problem.
Will it wash at all with LE?
Usually the cycle stops. Even if water fills, it will not wash well without the motor. Skip running it until it is checked. Skip running it until it has been checked, since wash water will not reach the dishes the way it should.
Can a dish stop the motor?
A dish can block the spray arm, but the code is about the motor. Check that nothing is blocking the arm, and if LE stays, we test the motor and its wiring.
Still seeing LE?
A technician diagnoses it on site and gives you the price in writing before any work starts.
