Error code · Washer

LG Washer Code Cd: Drying Cycle Finished

On LG front-load washers with an alphanumeric display, Cd appears on WashCombo and other models that have a dry function, and it is not an error. It marks the cool-down at the end of a drying…

Low risk · DIY check OK

(713) 597-5662

Code: Cd
Appliance: Washer
Brand: LG
Warranty: 30-day workmanship

What Cd means

On LG front-load washers with an alphanumeric display, Cd appears on WashCombo and other models that have a dry function, and it is not an error. It marks the cool-down at the end of a drying cycle. The washer periodically tumbles the load for up to 4 hours, and the message remains until the clothes are removed or START/PAUSE is pressed.

Common causes of Cd

A drying cycle just ended
The clothes are still in the drum
START/PAUSE was not pressed to end the stage

✓ One safe check you can try

1. Take the clothes out of the drum when the cycle has finished. 2. Or press START/PAUSE to stop the cool-down stage. 3. Leave the door open afterward so the drum and gasket can air out. 4. If Cd shows up at a time you did not dry anything, tell us.

! Why to stop there

If a load stays wet after a full dry cycle, the issue is the drying itself, and that is a separate check from this message.
We read what the machine is actually doing on site if Cd seems out of place.
We give a written price before any work, and the repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

UELG Washer Code UE: Unbalanced Load vS, uSLG Washer Code vS, uS: Vibration Sensor dE1LG Mini Washer Code dE1: Drawer Not Closed dE3 (dO)LG Mini Washer Code dE3 (dO): Inner Cover Open dE4LG Mini Washer Code dE4: Drawer Lock Trouble Ed3LG Front-Load Washer Code Ed3: Softener Pump PSLG Front-Load Washer Code PS: Power Supply Ed4LG Front-Load Washer Code Ed4: Softener Circuit Open

CdCd questions

Is Cd a problem on my LG front-load washer?

No. On models with a dry function, Cd is the cool-down at the end of drying. The washer tumbles the load now and then, and it is working normally.

How do I stop Cd on the display?

Take the clothes out or press START/PAUSE. Either ends the message, and the machine is ready for the next load once you close the door and choose a cycle.

Why does my drum keep turning after drying?

That is the cool-down, which tumbles the load periodically for up to 4 hours so the clothes are not left sitting hot and creased in a still drum.

Book a visit

Still unsure about Cd?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 597-5662