WM8980HVA
LG WM8980HVA Big Drum Washer Repair
Most common issues on this model
- Spin balance and load-sensing response
- Control and display behavior
- Water inlet valves and fill speed
- Drain pump filter, hose and door boot
The WM8980HVA is a current LG front load washer rated at 5.2 cubic feet and listed as Mega Capacity. Its electronic control shows cycle choices on a digital display, and load-sensing spin control adjusts the spin to what is in the drum.
Owners usually call us about two things with a washer like this: a cycle that stalls part way, or spin that never reaches speed. Because the control reads the load, we check whether the sensor is reporting sensible values, whether the drum is level, and whether water is draining fully. A tub that still holds water at the end of a cycle often traces to the drain pump filter or hose rather than the pump.
We run a test cycle, clear the filter and inspect the door boot. We read the model and serial from the label before we order anything, since a family of similar numbers can use different parts. The price is written first, and the repair carries a 30-day workmanship warranty.
Key features
- 5.2 cu. ft. Mega Capacity front-load washer
- Load-sensing spin control
- Display-driven electronic cycle control
Error codes this model can show
Why does my WM8980HVA stall before finishing?
The control reacts to what its sensors read. A bunched load, standing water or an unlevel washer can all pause a cycle. We check each of these, then test the sensor if it keeps happening.
How big is the drum?
The listing gives 5.2 cubic feet in the Mega Capacity class. Large loads of bedding make balance more important, so leveling is part of every visit.
Do you check the drain on this model?
We clear the pump filter, look at the hose and run water through during a test, because leftover water in the drum causes many stalled spins.
Book repair for your WM8980HVA
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.