LG Refrigerator Code rS: Upper Sensor Open or Shorted
For LG refrigerators with an LED or LCD temperature display, rS is a short or a disconnection in the refrigerator sensor circuit, which the digital and analog listing places at the upper part of the compartment,…
- Code
- rS
- Appliance
- Refrigerator
- Brand
- LG
- Warranty
- 30-day workmanship
What rS means
For LG refrigerators with an LED or LCD temperature display, rS is a short or a disconnection in the refrigerator sensor circuit, which the digital and analog listing places at the upper part of the compartment, labeled R1. The control cannot get a clean reading from that sensor, so it may cool by guesswork. You may see food freezing at the back or a fresh-food side that runs warm. The code can also appear as Er rS.
Common causes of rS
- A sensor plug that has loosened or corroded
- A sensor wire that is pinched, cut or shorted
- Whether the upper sensor itself reads in range
- The sensor input on the main board
1. Note whether the display shows rS or Er rS. 2. Make sure nothing is wedged against the back wall of the fresh-food section, and that the doors seal fully. 3. Check the temperature of the food and move anything delicate to a cooler if it feels off. 4. Call us to schedule a visit, because there are no owner repair steps for this code.
- A short and an open wire read differently at the sensor, and we test the circuit to learn which one the control is seeing.
- If the sensor reads correctly, the problem moves to the wiring or the board, and we do not replace parts on a guess.
- We give a written price before work starts, and the repair is covered by a 30-day workmanship warranty.
Other Refrigerator codes
What does rS mean on an LG refrigerator?
It means the control sees a short or a disconnection in the refrigerator sensor circuit. The listing ties it to the upper part of the compartment.
Can I keep using the refrigerator with rS?
The cooling may still run, but it is not following a real temperature reading. Watch the food, keep the doors closed, and have us check it soon.
Is the sensor the only possible cause?
No. A loose plug, damaged wire or board input can give the same code, which is why we test the circuit before replacing any part.
Still seeing rS?
A technician diagnoses it on site and gives you the price in writing before any work starts.
