Error code · Dryer

LG Dryer Codes d80, d90, d95: Restricted Airflow

Medium · inspection needed

Code: d80, d90, d95
Appliance: Dryer
Brand: LG
Warranty: 30-day workmanship

What d80, d90, d95 means

LG dryers show d80, d90 or d95 when airflow is restricted somewhere between the dryer and the outside exhaust. The three codes point to the same problem at rising levels, and d95 is the most severe. The restriction may sit in the lint tray, the exhaust hose behind the dryer, the duct inside the wall, or the outside flapper. The dryer keeps running but dries slowly, runs hot, and may stop before the clothes are dry.

Common causes of d80, d90, d95

Lint tray or housing clogged
Exhaust hose crushed or kinked
Duct or outside flappers packed with lint
Load too large for good airflow

✓ One safe check you can try

1. Clean the lint tray and wipe the housing. 2. Run a smaller load. 3. Check the exhaust hose behind the dryer for a crush or kink. 4. Check the outside flappers and clear any lint. 5. If airflow is still poor, have the vent cleaned by a professional, then restart.

! Why to stop there

After the visible parts are clear, a hidden duct restriction is the most likely cause.
We check airflow at the dryer and the outlet.
We confirm the dryer runs a full cycle without a vent code before we finish.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

LE1LG Dryer Code LE1: Drum Motor LE2, AE, CE1LG Dryer Code LE2, AE, CE1: Compressor LE3LG Dryer Code LE3: Air Circulation Motor ndLG Dryer Code nd: Water Not Draining nE, nF, nCLG Dryer Codes nE, nF, nC: Wi-Fi and NFC nPLG Electric Dryer Code nP: No Heater Current PFLG Dryer Code PF: Power Failure PSLG Electric Dryer Code PS: Voltage Error

d80, d90, d95d80, d90, d95 questions

What is the difference between d80, d90 and d95?

They are rising levels of the same airflow restriction. The higher number means a more severe blockage, so deal with the vent right away. Cleaning the lint tray and checking the hose and outside flappers are the first steps, and we test airflow if it stays restricted.

Can I clean the vent myself?

You can clean the lint tray, the hose behind the dryer and the outside flappers. For a long or hidden duct, a professional vent cleaner is the better choice.

Will a smaller load help?

It can help a little because less air is needed, but it does not fix the blockage. Clear the vent so the dryer can breathe.

Book a visit

Still seeing d80, d90, d95?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 597-5662