Error code · Washer

LG Washer Codes dE, dE1 and E01: Door Not Shut

Low risk · DIY check OK

Code: dE, dE1, E01
Appliance: Washer
Brand: LG
Warranty: 30-day workmanship

What dE, dE1, E01 means

On LG front-load washers with an alphanumeric display, including the washer half of a WashTower and WashCombo, dE, dE1 and E01 all mean the door is not closed properly. The most common reason is laundry caught between the door and the gasket. The washer will not start or will pause until the door registers closed. Top-load washers list only a single dE for an open door.

Common causes of dE, dE1, E01

Laundry caught between the door and the gasket
A door that was not pushed fully shut
A door lock that does not register closed
The door latch or its wiring

✓ One safe check you can try

1. Open the door, clear any clothing from the gasket and door edge, then close it again. 2. To reset, unplug the washer or turn the breaker off, hold START/PAUSE for 5 seconds, and restore power. 3. Start a cycle and see whether the code returns. 4. If it continues, call us.

! Why to stop there

If the door is clear and the code returns, the latch or its circuit is what we test next.
A door that sits slightly off can fail to register, so we check how it closes as well.
The price is given in writing before work starts, and the repair has a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

UELG Washer Code UE: Unbalanced Load vS, uSLG Washer Code vS, uS: Vibration Sensor dE1LG Mini Washer Code dE1: Drawer Not Closed dE3 (dO)LG Mini Washer Code dE3 (dO): Inner Cover Open dE4LG Mini Washer Code dE4: Drawer Lock Trouble Ed3LG Front-Load Washer Code Ed3: Softener Pump PSLG Front-Load Washer Code PS: Power Supply Ed4LG Front-Load Washer Code Ed4: Softener Circuit Open

dE, dE1, E01dE, dE1, E01 questions

What do dE, dE1 and E01 mean on an LG front-load washer?

All three mean the door is not closed properly. The usual cause is laundry caught between the door and the gasket, so clear the rim of the door opening first.

How do I reset the washer after dE?

Re-open and close the door, then unplug or turn the breaker off, hold START/PAUSE for 5 seconds, and restore power. If it continues, service is needed.

Does a top-load washer show the same code?

A top-load washer lists a single dE for an open door, without dE1 or E01. The cure there is much the same: close the lid or door fully.

Book a visit

Still unsure about dE, dE1, E01?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 597-5662